Installation (from 07/2011)

1NZ-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE (for Hatchback): INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.

NOTICE:
Do not twist the O-ring.

(b) Install the camshaft timing oil control valve assembly with the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

NOTICE:
* If a component has been dropped or subjected to a strong impact, replace it.
* Make sure that the O-ring is not damaged or does not jump out of position during installation.

(c) Connect the camshaft timing oil control valve assembly connector.

2. INSTALL NO. 2 CYLINDER HEAD COVER

(a) Install the No. 2 cylinder head cover with the 4 nuts.

Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)