Diagnostic Mode 9: Vehicle Information

Diagnostic Mode 9: Vehicle Information

Function
In this diagnostic mode, vehicle specific diagnostic data such as e.g. the control module versions will be displayed.

Requirement
- There must not be any DTCs stored in DTC memory. Diagnostic mode 3: Check DTC memory. Diagnostic Mode 3: Check DTC Memory

Work procedure
- Connect diagnostic tester. Diagnostic Tester, Connecting
- Switch ignition on.
- Under address word 33, select "Diagnostic mode 9: Vehicle information".
- Select desired vehicle information 'Test-ID XX".

Display vehicle information







- End diagnosis and switch ignition off.