Window, Undamaged, Preparing for Glazing

Window, Undamaged, Preparing for Glazing

• When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and ceramic coating.





• The remaining material serves as a base for the new adhesive sealing material being applied.

CAUTION!
Do not prime or use a cleaning solution on the adhesive surface. Keep the adhesive surface free of dirt and grease.

Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the activator D 181 801 A1.