Diagram 79/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC), Left Front Brake Pad Wear Sensor, Brake System Warning Lamp, ABS Warning Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G34 - Left Front Brake Pad Wear Sensor

J285 - Instrument Cluster Control Module with display unit

J519 - Vehicle Electrical System Control Module

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console

K47 - ABS Warning Lamp

K118 - Brake System Warning Lamp

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(381) - Ground Connection 16 (in main wiring harness)

(B379) - Brake Wear Indicator Connection 1 (in main wiring harness)

(B380) - Brake Wear Indicator Connection 2 (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

_ . _ . _ - Only models with flexible Service Reminder Indicator (SRI)

Previous Diagram 79/7 (Tracks 71-84)

Next Diagram 79/9 (Tracks 99-112)