Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2008 >> New Beetle (1C1) L5-2.5L (BPS) >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> Diagnostic Trouble Code Descriptions >> Data Bus on Board Diagnostic Interface J533 Gateway
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Data Bus on Board Diagnostic Interface J533 Gateway



DTC Table

NOTE:
- The following table lists all malfunctions, with the corresponding 5 digit code numbers, that can be recognized by instrument cluster control module J285 and printed out by the scan tool VAG 1551.
- If malfunctions do not occur regularly, these are displayed as occurring sporadically ("SP").
- DTC codes appears only on printout.
- Before replacing components, check the wiring and connections to these components as well as ground connections, according to wiring diagram.
- When repair has been carried out, the Diagnostic Trouble Code (DTC) memory must always be erased and checked again with scan tool VAG 1551 .
- If there is a specific complaint and no malfunctions are recognized after checking Diagnostic Trouble Code (DTC) memory, carry out function 03, "Output Diagnostic Test Mode (DTM)" Function 03 - Output Diagnostic Test Mode, or function 08, "Read measuring value block". Function 08 - Read Measuring Value Block
pro multis · About Operation CHARM