Noise Insulation

Noise Insulation

=> [ Noise Insulation Assembly Overview, Long Version ]

=> [ Noise Insulation Assembly Overview, Short Version ]

Noise Insulation Assembly Overview, Long Version

• Slight changes may have to be made to removal and installation procedures, depending upon engine installed in vehicle.

• The screws - 3 - are micro-encapsulated and must be replaced after loosening.





1 Noise Insulation

• - Arrow - points in direction of travel.

• Removing:

- Remove the screws - 2 - and - 3 -.

- Pull the noise insulation toward the rear out of the lock carrier mounts.

2 Bolt

• Quantity: 9

• Tightening specification: 2 Nm

3 Bolt

• The screws are micro-encapsulated.

• Always replace bolts after loosening.

• Quantity: 3

• Tightening specification: 6 Nm

Noise Insulation Assembly Overview, Short Version

• Slight changes may have to be made to removal and installation procedures, depending upon engine installed in vehicle.





1 Noise Insulation

• - Arrow - points in direction of travel.

• Removing:

- Remove the bolts - 2 -.

- Pull the noise insulation toward the rear out of the lock carrier mounts.

2 Bolt

• Quantity: 9

• Tightening specification: 2 Nm