Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2010 >> CC (357) V6-3.6L (BLV) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Testing and Inspection >> Component Tests and General Diagnostics >> Adapting High Beams As Assisting Driving Light
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Adapting High Beams As Assisting Driving Light







Adapting High Beams As Assisting Driving Light

• With Assisting Driving Light (ADL) switched on or with Automatic Driving Light Control (ADLC) switched on, the driving lights are switched on and off automatically via a twilight sensor and rain sensor.

• Additional information:

Refer to the Owner's Manual.

On the Assisting Driving Light, high beams can be switched on or off.

- Connect the Vehicle Diagnostic Tester. Testing and Inspection

- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Vehicle electrical system control module

• Functions of Vehicle Electrical System Control Module

• Adapting high beams as assisting driving light

pro multis · About Operation CHARM