Variable Valve Timing Actuator: Service and Repair

Camshaft Adjustment Valve 1 N205

- Remove the charge air pipe from the noise generator, if equipped. Refer to => [ Charge Air Hose to Noise Generator ] Charge Air Hose to Noise Generator.






- Disconnect the connector from the camshaft adjustment valve 1 (- 1 -).

- Remove the bolts - arrows - and then the camshaft adjustment valve 1.

Installing

• Tightening specification, refer to => [ Timing Chain Cover Overview ] Timing Chain Cover Overview.

Install in the reverse order of removal. Note the following:

- Coat the seal and the O-ring with engine oil.