Air Injection Pump: Service and Repair

Secondary Air Injection Pump Motor (V101)

Removing

- Remove the throttle valve control module. Refer to => [ Throttle Valve Control Module (J338) ] Service and Repair.

- Disconnect the connecting pipes - 1 and 2 -. To do so, compress the securing rings.






- Remove the noise insulation.

- Disconnect the connectors - 1 and 2 -.






- Press out the clip - 3 - for the wire guide.

- Press out the wire clip at the top front bolt.

- Remove the intake manifold support bolts - 1 - from the intake manifold.






- Remove the lower bolt - arrow - from the intake manifold support.






- Move the intake manifold support slightly to the side. Remove the nuts and the AIR pump motor.

Installing

Install in reverse order of removal. Note the following:

• Make sure that connecting pipes lock securely to the AIR pump motor.

Tightening Specifications