Undamaged Side Window, Removing

Undamaged Side Window, Removing

• The following describes removing and installing the left side window. Removing and installing the right side window is identical.

- Remove the side trim panel.






- Pull cutting cord - 1 - through adhesive sealant at place shown in picture into vehicle interior at lower area of rear window using (V.A.G 1474/2) from (V.A.G 1474 A).

- Insert the cutting cord - 3 - into the window flange behind the seal using the small tube - 1 -.






- Secure a cord end - 3 - to (V.A.G 1351/1) - 2 - to counter hold.






- Pull other end - 2 - of cutting cord into interior.

- Secure other end of cord to (V.A.G 1654 A) - 3 -.

- Cut window free by moving (V.A.G 1654 A) - 3 - accordingly.

- While cutting window free, push cutting cord with plastic wedge against window in order to have clearance at window flange.

- (V.A.G 1654 A) - 3 - can be used in place of (V.A.G 1654) - 3 -






- As shown in illustration, one suction cup can be removed from the (V.A.G 1654) - 3 -. By doing this, the roller on the (V.A.G 1654 A) - 3 - can be placed closer to the window flange.