Instrument Panel Fuse Panel

Instrument Panel Fuse Panel

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

The fuse panel is located behind the storage compartment inside the driver footwell.

When disconnecting and connecting the battery, always perform the work procedure as described in the repair information. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the trim inside the driver footwell.

- Remove the screws - arrows - and pull the fuse panel - 1 - downward off the bracket.






Installing

Installation is performed in the reverse order of removal. Note the following:

- Insert the right side of the fuse panel into the bracket.

- Then insert the left side of the fuse panel and tighten both screws.

- Tighten the screws to 4 Nm.