Blower Motor: Service and Repair

1. Remove passenger side sound wall (3 screws).
2. Remove glove compartment:
- Remove glove compartment (4 screws).
- Remove glove compartment panel (4 screws).
3. Remove fan motor (G3):
- Disconnect fan motor connector.
- Remove cable duct from fan motor.
- Remove the two connectors from their brackets.
- Remove fan motor (4 screws).
4. Install:
- Fan motor.
- Connectors (2) in brackets.
- Cable duct.
- Fan motor connector.
- Glove compartment panel.
- Glove compartment.
- Soundproofing.