HA. High Idle
HA. High idle
HA1
Mechanical overview
- Check the air and vacuum hoses for leakage according to U. Air and vacuum hoses. U. Checking the Air and Vacuum Hoses
If no air leakage is discovered.
^ Checking the injection pulses HA2
HA2
Checking the injection pulses
Connect a voltmeter between 1 and 2 on on one of the injectors.
- Start the engine.
The voltmeter should show 200-400 mV
If the value Is OK:
^ RB. Checking the throttle valve. RB. Adjustment of Throttle Valve
If the value differs:
^ Checking the engine temp. sensor HA3.
HA3
Checking the engine temp. sensor
Troubleshoot according to EG. Fault code 1-2-3 Engine temp. sensor signal absent or faulty. DTC 1-2-3
If no fault is discovered:
Intermittent fault.
^ Check the connectors for loose connection according to CD. CD. Checking of Wiring