Exhaust System: Service and Repair
Exhaust system, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.
Removing the exhaust system
- Raise the car
- Remove the old exhaust pipe. Begin from the front.
Installing the exhaust system
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling Flanged Joint, Assembling.
Note! The new exhaust system is supplied in two sections.
Install:
- the front section of the exhaust system. Use a new flange gasket. Do not tighten
- the rear section with the pipe clamp
- the mountings for the exhaust system.
Adjust the position of the exhaust system and tighten:
- the screws and the nuts for the flange gasket
- the pipe clamp.