Data Link Connector: Service and Repair

Data link connector (OBD-II)

Special tools:
951 2636 Terminal removal tool 951 2636 Terminal Removal Tool

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Disassembly

Disassembling secondary lock
Expose the data link connector (DLC).




Pull the secondary lock out to the side. Use an electrician's screwdriver, as illustrated.




Use tool: 951 2636 Terminal removal tool 951 2636 Terminal Removal Tool to disconnect the cable terminal's lock. See the illustration.
At the same time pull the cable carefully backwards.





Assembly

Assembling primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock
Press the secondary lock into place.