Radiator: Service and Repair

Radiator

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Removing the engine cooling fan (FC)
Remove the cooling fan. Refer to: Engine cooling fan (FC) Service and Repair





Install the following items:
- bracket
- screws, lightly, 4 pcs.





Remove the following items:
- screw
- engine compartment panel.





Remove the following items:
- screw
- radiator mounting.




Slightly raise the condenser and suspend from a suitable place, so that the condenser is not put under any strain.




- the screws for the upper radiator mounting, 2 pcs on both sides
- bracket under air conditioning aggregate
- radiator downwards.

Installation

Note! Tighten. Refer to: Tightening torque Tightening Torque





Install the following items:
- the radiator
- Bracket
- screws, 4 pcs, lightly.




Install the screws for the upper radiator mounting, 2 pcs on both sides.





Install the following items:
- engine compartment panel.
- screws, M6.




Install a mobile jack under the radiator.




Remove the bracket.
Install the engine cooling fan. Refer to: Engine cooling fan (FC) Service and Repair