Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2007 >> XC90 FWD L6-3.2L VIN 98 B6324S >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Clockspring Assembly / Spiral Cable >> Service and Repair >> Contact Reel/Steering Wheel Angle Sensor, Replacing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Contact Reel/Steering Wheel Angle Sensor, Replacing






Contact reel/steering wheel angle sensor, replacing

As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparations




Disconnect the battery lead. See Battery, disconnecting Battery Disconnecting.

Removing the contact reel and steering wheel angle sensor





Remove:
- the steering column covers. See Replacing the steering column covers Service and Repair
- the steering wheel. See Steering wheel, replacing Steering Wheel, Replacing.
Disconnect the left connector.

Remove:
- four screws
- the contact reel.

Installing the contact reel and steering wheel angle sensor

Note! For tightening torques, see [1][2]Specifications

Install:
- the contact reel
- the 4 M5 screws. Tighten
- the connector.
Zero the contact reel. See Contact reel driver airbag module, resetting Adjustments.

Install:
- the steering wheel. See Steering wheel, replacing Steering Wheel, Replacing
- the steering column covers. See Replacing the steering column covers Service and Repair.

pro multis · About Operation CHARM