Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Turn Signal Switch: Service and Repair
Turn signal switch, replacing
Removal
Turn signal lamp and dip switch
- Ignition off
- Remove the upper and lower steering column covers. See Replacing the steering column covers Service and Repair
- Remove the 2 screws for the switch
- Remove the rubber boot.
Note! The pins on the switch are fragile.
- Carefully pull the switch straight out.
Installation
Turn signal lamp and dip switch
- Install the rubber boot.
Note! The pins on the switch are fragile.
- Insert the switch straight in from the side in the correct position. Carefully press the switch into the micro-switch. Ensure that the pins are in the correct positions in the micro-switch
- Install the screws for the switch
- Install the upper and lower steering column covers. See Replacing the steering column covers Service and Repair.