Phone Module (PHM)

Phone Module (PHM)

Operation number: 39405-2

Removal

Note! Removal steps in this procedure may contain installation details.





Remove glove compartment Refer to: Glove compartment Glove Compartment





Caution! Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Note! Make sure that the component terminals are not bent or damaged.

Note! Make sure that the optical connectors are clean and free of foreign material.

Vehicles with Bluetooth




Torque: M6, 10 Nm





Note! Make sure that the component terminals are not bent or damaged.





Caution! Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Note! Make sure that the component terminals are not bent or damaged.

Note! Make sure that the optical connectors are clean and free of foreign material.





All vehicles

Installation

To install, reverse the removal procedure.

Order and download appropriate software