Receiver Dryer: Service and Repair
Operation number: 87410-2
Receiver drier
Removal
Note! Removal steps in this procedure may contain installation details.
Drain refrigerant Refer to: Refrigerant, draining Refrigerant, Draining
Vehicles early version
Detach the refrigerant pipe Refer to: Condenser to Connector Block line Condenser To Connector Block Line
Torque: M7, 17 Nm
Vehicles late version
Torque: M8, 24 Nm
Torque: Drier filter, 11 Nm
Installation
To install, reverse the removal procedure.
Note! Use new seals.
Fill with refrigerant Refer to: Draining refrigerant, vacuum-pumping, and filling Draining Refrigerant, Vacuum-Pumping, And Filling
Perform climate unit, checking Refer to: Climate control system, check Climate Control System, Check