Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 1995 >> Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC) >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Pressure Plate >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Plate: Service and Repair

TOOLS REQUIRED
- 07LAB-PV00100 Ring Gear Holder
- 07NAF-PR30100 Clutch Alignment Shaft
- Or Equivalent

INSTALLATION





1. Install the ring gear holder.
2. Apply grease to the spline of the clutch disc, then install the clutch disc using the special tools as shown.

NOTE: Use only Super High Temp Urea Grease.





3. Install the pressure plate.





4. Torque the mounting bolts in a crisscross pattern as shown. Tighten the bolts in several steps to prevent warping the diaphragm spring.
5. Remove the special tools.
6. Recheck the diaphragm spring fingers for height.

pro multis · About Operation CHARM