Camshaft, Engine

DIMENSIONS
Camshaft-to-Holder Oil Clearance:
Standard (New) 0.050 - 0.089 mm (0.002 - 0.004 inch)
Service Limit 0.15 mm (0.006 inch)

Camshaft Total Runout:
Standard (New) 0.03 mm (0.0012 inch) max.
Service Limit 0.04 mm (0.0016 inch)

Cam Lobe Height Standard (New):
Intake
Primary 37.086 mm (1.4601 inch)
Mid 38.037 mm (1.4975 inch)
Secondary 38.037 mm (1.4975 inch)
Exhaust
Primary 36.559 mm (1.4393 inch)
Mid 37.398 mm (1.4724 inch)
Secondary 36.741 mm (1.4465 inch)

End Play:
Standard (New) 0.05 - 0.15 mm (0.002 - 0.006 inch)
Service Limit 0.05 mm (0.02 inch)

TIGHTENING SPECIFICATIONS
Camshaft Holders And Holder Plate Bolts [1]:
Bolts 1 through 24 (8 mm x 1.25 mm bolts) 22 Nm (16 ft. lbs.)
Bolts 25 through 28 (6 mm x 1.0 mm bolts) 9.8 Nm (87 in. lbs.)

[1] Refer to Service and Repair for bolt identification and tightening sequence.