Transmission Position Sensor/Switch: Adjustments

A/T GEAR POSITION SWITCH / ADJUSTMENT
1. Shift to the [P] position, and loosen the nuts.
2. Slide the switch in the direction of [D4] position [within 2.0 mm (0.079 in.)] so that there is continuity between the "A" and "L" terminals in the range of free play of the shift lever.







3. Recheck for continuity between each of the terminals.


NOTE:
- If adjustment is not possible, check for damage to the shift lever detent and/or the bracket. If there is no damage, replace the console switch.
- The engine should start when the shift lever is in position [N] in the range of free play.