Cruise Control Servo Cable: Adjustments

ACTUATOR CABLE / ADJUSTMENT
1. Check that the actuator cable operates smoothly without binding or sticking.
2. Start the engine, and warm it up to normal operating temperature (radiator fans come on twice).







3. Measure how far the output linkage moves from the fully closed position. Free play should be 11 ± 1.5 mm (0.43 ± 0.06 in).
4. If the free play is not within specs, loosen the locknut, and turn the adjusting nut as required.

NOTE: If necessary, check the throttle cable, then recheck the Output linkage free play.

5. Retighten the locknut, and recheck the free play.