Heated Glass Element Switch: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in SRS before performing repairs or service.

1. Remove the dashboard lower cover, and disconnect the connectors.

Switch Replacement:

2. Remove the dashboard lower pad.

Switch Replacement:

3. Remove the tilt cover.

Switch Replacement:

4. Remove the steering column covers.

NOTE: Be careful not to damage the steering column covers.

5. Disconnect the 18P and 10P connectors.

CAUTION: Be careful not to damage the SRS wire harness.

Switch Replacement:

6. Remove the six screws, then remove the rear window defogger-light switch assembly.

Switch Replacement:

7. If necessary, replace the rear window defogger switch bulbs.