Vanity Lamp: Testing and Inspection

With Homelink Remote Control System
1. Remove the two screws from the sunvisor bracket.




2. Remove the sunvisor, then disconnect the 2P connector.

NOTE: The switch is built into the vanity mirror.




3. Check for continuity between the terminals in each switch position according to the table.

Without Homelink Remote Control System
1. Remove the two screws from the sunvisor bracket.




2. Remove the sunvisor, then disconnect the positive terminal.

NOTE: The switch is built into the vanity mirror.




3. Check for continuity between the terminals in each switch position according to the table.