Ignition Switch: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.

NOTE: The PCM memory must be reset after reconnecting the battery.

1. Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable.
3. Remove the dashboard lower cover.
4. Disconnect the 7P connector from the under-dash fuse/relay box.
5. Remove the steering column covers.
6. Insert the ignition key, and turn it to "O".




7. Remove the two screws and the electrical switch from the steering lock.
8. After reconnecting the battery, enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.