Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2002 >> RSX L4-2.0L (VTEC) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning >> How to End a Troubleshooting Session
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

How to End a Troubleshooting Session

NOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes.

How to Reset the ECM/PCM

You can reset the ECM/PCM in either of two ways:
- Use the OBD II scan tool or Honda PGM Tester to clear the ECM/PCM memory.

See the OBD II scan tool or Honda PGM Tester user's manuals for specific instructions.




- Turn the ignition switch OFF, and remove the No.6 ECU (ECM/PCM) (15 A) fuse (A) from the under-hood fuse/relay box (B) for 10 seconds.

How to End a Troubleshooting Session (required after any troubleshooting)

1. Reset the ECM/PCM as described above.
2. Turn the ignition switch OFF.
3. Disconnect the OBD II scan tool or Honda PGM Tester from the DLC.

NOTE: The ECM/PCM is part of the immobilizer system. If you replace the ECM/PCM, it will have a different immobilizer code. In order for the engine to start, you must rewrite the immobilizer code with the Honda PGM Tester.
pro multis · About Operation CHARM