Interior LF Antenna Test

Interior LF Antenna Test

NOTE: Before symptom troubleshooting, check the DTC troubleshooting. If a DTC is indicated, troubleshoot the indicated DTC first.

1. Connect the HDS to the data link connector (DLC).
2. Turn the ignition switch ON (II) with the built-in key.
3. Select the KEYLESS ACCESS from the SYSTEM SELECT menu of the HDS.
4. Select the SELF CHECK and if any malfunction is found, troubleshoot it first.







5. Select the FUNCTION TEST, and do the forced driving test by checking the transmitting area (A) between the LF antenna and the keyless remote (except on the dashboard, in the glove box, door pockets, console box, and other enclosed areas).

NOTE: Forced driving checks cannot operate at the same time, check the LF antennas one at a time.