Shifter M/T: Service and Repair

Shift Lever Housing Replacement
1. Remove the rear center console.
2. Remove the center console panel.





3. Remove the shift lever bracket (A) and center console duct (B).





4. Remove the harness clips (A).
5. Remove the cotter pin (B), washer (C), and clamp (D).
6. Remove the shift cable clip (E).
7. Remove the select cable and shift cable (F) as shown.





8. Remove the shift lever housing.
9. Install the shift lever housing in the reverse order of removal.
10. Install the center console panel.
11. Install the rear center console.