Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2006 >> TL V6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Seat Occupant Classification Module - Air Bag >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Occupant Classification Module - Air Bag: Service and Repair

Front Passenger's Weight Sensor Unit Replacement

NOTE: Review the seat replacement procedure before performing repair or service.

Removal
1. Slide the seat all the way to the rear.
2. Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
3. Disconnect the front passenger's airbag 4P connector.




4. Disconnect the connectors. Remove the mounting nuts (A) and the front passenger's weight sensor unit (B) from the seat riser.

Installation

NOTE: Be sure to install the harness wires so they are not pinched or interfering with other parts.




1. Place the new front passenger's weight sensor unit on the seat riser. Tighten the two mounting nuts (A) and connect the connectors.
2. Reconnect the front passenger's airbag 4P connector.
3. Reconnect the battery negative cable.
4. Calibrate the front passenger's weight sensor unit.
5. After installing the front passenger's weight sensor unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.
pro multis · About Operation CHARM