General Specifications
Cylinder Head6 Point
Tighten bolts sequentially in three steps:
1st Step Torque 39 N-m (4.0 kgf-m, 29 lbf-ft)
2nd Step Torque 69 N-m (7.0 kgf-m, 51 lbf-ft)
3rd Step Torque 98.1 N-m (10.0 kgf-m, 72.3 lbf-ft)
12 Point
Torque in sequence 29 N-m (3.0 kgf-m, 22 lbf-ft).
After torquing, tighten in 2 steps (90° per step).
New bolt extra 90°.
Measure the diameter of each cylinder head bolt at point A and point B.
If either diameter is less than 11.3 mm (0.44 in.), replace the cylinder head bolt.
Main Bearing
Rod Bearing
Torque the bolts (B) 20 N-m (2.0 kgf-m, 14 lbf-ft) +90°
Crankshaft Pulley
Torque 64 N-m (6.5 kgf-m, 47 lbf-ft) +60°
Oil Pump
Water Pump
