Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2008 >> TSX L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Fluid Pressure Sensor/Switch >> Service and Repair >> 2nd Clutch Transmission Fluid Pressure Switch Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

2nd Clutch Transmission Fluid Pressure Switch Replacement

2nd Clutch Transmission Fluid Pressure Switch Replacement
1. Remove the intake air duct.
2. Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the switch.
3. Install a new 2nd clutch transmission fluid pressure switch (A) with a new sealing washer (B), and tighten the switch to the specified torque.





4. Check the connector for rust, dirt, or oil, and clean if necessary, then connect the connector securely.
5. Install the intake air duct.
pro multis · About Operation CHARM