Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2009 >> MDX V6-3.7L >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Set Spd Doesn't Resume When Resume/Accel Button Pressed (Cruise Main Button Pressed On, Set Spd Temp Canceled)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Set Spd Doesn't Resume When Resume/Accel Button Pressed (Cruise Main Button Pressed On, Set Spd Temp Canceled)




Set speed does not resume when the resume/accel button is pressed (with the cruise control main button pressed on, and set speed temporarily canceled by pressing the brake pedal)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Check the brake pedal position switch adjustment. Adjustments

3. Do the cruise control input test. Cruise Control Input Test Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.

4. Do the cruise control combination switch test. Service and Repair

Also check for:

- Faulty brake pedal position switch
- Open circuit, loose or disconnected terminals: LT GRN/BLK, YEL

pro multis · About Operation CHARM