Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2009 >> MDX V6-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Overhaul >> A/T Transfer Assembly >> A/T Transfer Output Shaft (Hypoid Gear) Bearing Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/T Transfer Output Shaft (Hypoid Gear) Bearing Removal/Installation




A/T Transfer Output Shaft (Hypoid Gear) Bearing Removal/Installation

Special Tools Required

- Driver handle, 40 mm I.D. 07746-0030100
1. Remove the tapered roller bearing (A) from the transfer output shaft (hypoid gear) (B) with a bearing separator (C) and the press. Place a shaft protector (D) between the transfer output shaft (hypoid gear) and the press to prevent damaging the transfer output shaft (hypoid gear).






2. Install the 40 mm thrust shim (A) over the transfer output shaft (hypoid gear) (B).

3. Install the tapered roller bearing (C) over the transfer output shaft (hypoid gear) using the driver handle (40 mm I.D.) and the press.





pro multis · About Operation CHARM