Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RDX AWD L4-2.3L Turbo >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag Control Module >> Service and Repair >> SRS Unit Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

SRS Unit Replacement




SRS Unit Replacement

Removal

1. Do the battery terminal disconnection procedure Procedures, then wait for 3 minutes before starting work.

2. Remove the center console Center Console Removal/Installation.

3. Disconnect the SRS unit connector A (28P), SRS unit connector B (28P), and SRS unit connector C (16P).





4. Remove the TORX bolts (D) using a TORX T30 bit, then pull out the SRS unit.

Installation

1. Install the SRS unit (A) with a new TORX bolts (B) using a TORX T30 bit, then connect the connectors (C) to the SRS unit; push them into position until they click.

NOTE: Be sure the SRS unit is sitting squarely against it's bracket before torquing the TORX bolts.





2. Do the battery terminal reconnection procedure Procedures.

3. Do the ODS unit initialization Programming and Relearning.

4. Check the operation of the ODS unit with the HDS ODS Unit Operation Check.

5. Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then go off.

6. Install the center console Center Console Removal/Installation.

pro multis · About Operation CHARM