Trunk Pass-Through Cover Key Cylinder Replacement

Trunk Pass-through Cover Key Cylinder Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the rear seat-back. Rear Seat Removal/Installation

2. Remove the screws, and detach the hooks (A), then remove the upper cover (B).






3. Remove the screws, and detach the hook (A), then remove the key cover (B), and release the hook (C).






4. Remove the retainer clip (A), then remove the trunk pass-through cover key cylinder (B) from the lid (C).
NOTE: Wear eye protection when doing this step.

5. Install the key cylinder in the reverse order of removal, and make sure the trunk pass-through cover opens properly, and locks securely.