Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning




VSA Sensor Neutral Position Memorization

NOTE: Make sure to connect and disconnect the HDS to the 16P data link connector (DLC) with the ignition switch in LOCK (0).

1. Start the engine, let it idle.

2. Slowly drive the vehicle straight without operating the steering wheel for 3 m (10 ft) or more, then park the vehicle on a flat ahead surface while holding the steering wheel in the straight ahead position.

3. With the ignition switch in LOCK (0), connect the HDS to the 16P data link connector (DLC) (A) under the driver's side of the dashboard.

4. Turn the ignition switch to ON (II).

5. Do the VSA sensor neutral position memorization with the HDS.
NOTE:

- VSA neutral position memorized by clearing DTC with the HDS.

- Do not press the brake pedal during this procedure.

- Make sure the HDS communicates with the vehicle and the VSA modulator-control unit. If it doesn't troubleshoot the DLC circuit. Testing and Inspection

6. Turn the ignition switch to LOCK (0).





pro multis · About Operation CHARM