Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Lighting and Horns >> Testing and Inspection >> Combination Switch Control Unit Input Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Combination Switch Control Unit Input Test




Combination Switch Control Unit Input Test

1. Turn the ignition switch to LOCK (0), remove the driver's dashboard undercover, Driver's Dashboard Undercover Removal/Installation and the driver's dashboard lower cover, Driver's Dashboard Lower Cover Removal/Installation then remove the steering column covers. Steering Column Removal/Installation

2. Disconnect the 8P connector from the wiper/washer switch (combination switch control unit).

3. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

- If the terminals look OK, go to step 4.

4. Reconnect the connector to the wiper/washer switch, and do these input tests at the following connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, go to step 5.





5. Disconnect the 8P connector from the wiper/washer switch, and do these input tests at the following connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, the combination switch control unit must be faulty, replace the wiper/washer switch.









pro multis · About Operation CHARM