Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Component Tests and General Diagnostics >> Interior Lights Driver's MPCS Unit Input Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Interior Lights Driver's MPCS Unit Input Test




Interior Lights Driver's MPCS Unit Input Test

1. Turn the ignition switch to LOCK (0).

2. Remove the driver's door panel. Front Door Panel Removal/Installation

3. Disconnect driver's MPCS unit connector A (40P).

4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.

- If the terminals look OK, go to step 5.

5. With the connector still disconnected, do these input tests at the following connector.
- If any test indicates a problem find and correct the cause, then recheck the system.

- If all the input tests prove OK, go to step 6.





6. Reconnect the connector to the driver's MPCS unit, and do these input tests at the following connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, the control unit must be faulty; replace the driver's MPCS unit and go to step 7.





7. Reset the power window control unit. Testing and Inspection





pro multis · About Operation CHARM