Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Testing and Inspection




Transmission Range Switch Test

1. Do the battery removal procedure. Removal and Replacement

2. Remove the battery base.

3. Remove the air cleaner. Service and Repair

4. Disconnect the transmission range switch connector.






5. Check for continuity between terminals at the switch connector. There should be continuity between the terminals in the following table for each switch position.

6. Transmission range switch test is finished if the test results are OK.
If there is no continuity between any terminals, check that the transmission range switch installation. If the switch installation is OK, replace the switch. Service and Repair

7. Install the air cleaner. Service and Repair

8. Install the battery base.

9. Do the battery installation procedure. Removal and Replacement

Transmission Range Switch Connector





pro multis · About Operation CHARM