Tightening Torques
Cylinder head bolt
Measure the diameter of each cylinder head bolt at point A and point B.
If either diameter is less than 10.6 mm (0.42 in), replace the cylinder head bolt
FRONT
REAR
Step 1 29 N-m (3.0 kgf-m, 22 lbf-ft)
Step 2 90 °
Step 3 90 °
If using a new cylinder head bolt, tighten the bolt an extra 90 °
Intake manifold Specifications
Exhaust manifold Specifications
Camshaft gears Specifications