Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> TSX L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Latch Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Latch Cable: Service and Repair




Rear Seat-back Latch/Release Cable Removal/Installation

NOTE:

- Take care not to bend or scratch the interior trim.

- The left rear seat-back latch/release cable is shown; the right rear seat-back latch/release cable is similar.

1. Remove the rear seat-back release lever. Rear Seat-Back Release Lever Replacement

2. From the trunk compartment, detach the cable clip fastening the seat-back release cable (A).

3. Remove the rear bulkhead cover. Service and Repair






4. Detach the cable fastener (A) and disconnect the seat-back release cable (B) from the seat-back latch (C). Detach the cable clip fastening the seat-back release cable on the trunk lid key cylinder bracket (D).






5. Remove the bolts, then remove the latch (A).

6. Install the latch/release cable in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

- Make sure the release cable is connected securely.

- Make sure the seat-back locks securely and unlocks properly.





pro multis · About Operation CHARM