Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> MDX V6-3.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Service and Repair >> AcuraLink Control Unit (XM Receiver) Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

AcuraLink Control Unit (XM Receiver) Removal/Installation




AcuraLink Control Unit (XM Receiver) Removal/Installation

With AcuraLink

NOTE: The AcuraLink must be reactivated by Acura Client Services when:

- The AcuraLink control unit (XM receiver) is replaced.
- DATA RESET was selected while in the self-diagnostic function.
- Vehicle ownership changes.

1. Remove the right rear side trim panel Interior Trim Removal/Installation - Rear Side Area.

2. Disconnect the connectors (A), then remove the bolts (B) and pull out the AcuraLink control unit (XM receiver) (C).





3. Install the AcuraLink control unit (XM receiver) in the reverse order of removal.

NOTE: If you replaced the AcuraLink control unit (XM receiver), make sure it has the latest software Programming and Relearning.

4. If you replaced the AcuraLink control unit, register the new AcuraLink (XM Receiver) unit I.D. number with XM radio 800-852-9696 and Acura Client Services 800-382-2238 and request a reactivation.

pro multis · About Operation CHARM