Shift Interlock Switch: Testing and Inspection

Park Pin Switch Test

1. Remove the center console panel Center Console Panel Removal/Installation.

2. Disconnect the A/T shift lock solenoid/park pin switch 4P connector (A) from the park pin switch (B).





3. Check for continuity between terminals No. 3 and No. 4.

- There should be continuity when the shift the shift out of P.
- There should be no continuity when the shift the shift lever to P.

4. If the continuity is not as specified, check the shift cable adjustment Adjustments. If the cable adjustment is OK, replace the park pin switch Service and Repair.