Windshield Washer Reservoir: Service and Repair
Washer Reservoir Replacement
1. Remove the front section of right front inner fender Front Inner Fender Replacement.
2. Disconnect the 2P connector(s) (A) from the windshield washer motor (B) and the washer fluid level switch (C) (Canada models).
USA Models
Canada Models
3. Disconnect the washer tube (D), then if necessary, remove the washer motor and the washer fluid level switch (Canada models).
NOTE: Fluid may flow out of the opening.
4. Remove the clip (A) and three bolts from the washer reservoir (B).
5. Install the washer reservoir in the reverse order of removal. Check the washer motor operation.