Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> TSX Sport Wagon L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Power Trunk / Liftgate Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Trunk / Liftgate Control Module: Service and Repair




Power Tailgate Control Unit Input Test/Replacement

1. Turn the ignition switch to LOCK (0).

2. Remove the left cargo area side trim panel Interior Trim Removal/Installation - Cargo Area.

3. Disconnect power tailgate connector (A) from the power tailgate control unit (B).

NOTE: All connector views shown are the wire side of the female terminals





4. Disconnect power tailgate connector (C) from the power tailgate control unit.

5. Disconnect power tailgate connector (D) from the power tailgate control unit.

6. Inspect all the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 7.

7. Reconnect all connectors to the power tailgate control unit, and do the following input tests:

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the power tailgate control unit.

NOTE: After replacement, open and close the tailgate by auto operation and wait for 5 seconds. Repeat this procedure 5 times or more for proper operation.









8. Reset the power tailgate control unit Programming and Relearning.

pro multis · About Operation CHARM