Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> ZDX V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Service and Repair >> Keyless Access Remote Slot Test/Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Access Remote Slot Test/Replacement




Keyless Access Remote Slot Test/Replacement

1. Remove the driver's inner dashboard trim Driver's Inner Dashboard Trim Removal/Installation.

2. Remove the two screws, then pull out the remote slot (A).





3. Disconnect the 16P connector (B) from the remote slot.

4. Check for continuity between the terminals in each slot state according to the table.

NOTE: Make sure the correct test lead (+ or -) is placed on the terminal.





5. If the continuity is not as specified, replace the remote slot.

6. Insert the remote into the remote slot.

7. Connect the positive battery terminal to remote slot connector terminal No. 16, and the negative battery terminal to terminal No. 8. Check that the remote cannot be removed from the remote slot. Connect the positive battery terminal to remote slot connector terminal No. 8, and the negative battery terminal to terminal No. 16. Check that the remote can be removed from the remote slot.





8. If the remote interlock solenoid works improperly, replace the remote slot.

9. Install the remote slot in the reverse order of removal.

pro multis · About Operation CHARM