Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> ZDX V6-3.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Blower Unit Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Unit Removal/Installation




Blower Unit Removal/Installation

1. Remove these items:

- Passenger's dashboard undercover Passenger's Dashboard Undercover Removal/Installation
- Passenger's dashboard trim Passenger's Dashboard Trim Removal/Installation
- Glove box Glove Box Removal/Installation
- Passenger's kick panel Service and Repair

2. Detach the harness clips (A). Remove the bolts, and the glove box frame (B).






3. Cut the plastic cross brace (A) in the glove box opening with diagonal cutters in the area shown. Retain the plastic cross brace to be reinstalled later.






4. Detach the wire harness clip (A), then remove the self-tapping screws, and the passenger's heater duct (B).






5. Disconnect blower motor connector (A) and climate control unit connectors (B), and detach the wire harness clips (C).






6. Remove the self-tapping screws and disconnect the recirculation control motor connector (A).






7. Disconnect the right engine compartment harness connector (C205) (A) and detach the harness clips (B). Remove the mounting nuts, and the blower unit (C).





8. Install the unit in the reverse order of removal. Make sure that there are no air leaks.

pro multis · About Operation CHARM