Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> ZDX V6-3.7L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Front Impact Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Impact Sensor Replacement




Front Impact Sensor Replacement

Removal

1. Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work.

2. Remove the front inner fender Front Inner Fender Replacement.

3. Left side; remove the bolts (A), then remove the intake air resonator (B).






4. Disconnect the left or right front impact sensor 2P connector (A) on the left or right engine compartment wire harness.





5. Remove the TORX bolt (B) using a TORX T30 bit, then remove the front impact sensor (C).

Installation

1. Install the front impact sensor (A) with the new TORX bolt (B) using a TORX T30 bit. Connect the left or right front impact sensor 2P connector (C) on the left or right engine compartment wire harness.






2. Left side; install the intake air resonator (A) with the mounting bolts (B).

NOTE: Make sure the intake air resonator are connected securely.






3. Do the battery terminal reconnection procedure.

4. Clear any DTCs with the HDS.

5. Confirm proper SRS operation: Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.

6. Reinstall all removed parts.

pro multis · About Operation CHARM